SATO CL408e - 14 Calendar Command; ESC+WT Calendar Setting

252
14. Calendar Command
14.1 Calendar
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se
M-84Pro-2/3/6
LC408e/412e
14.1 ESC+WT Calendar Setting
ESC+WT
HEX Code
ESC
WT
Parameter
<1B>16
<57>16<54>16
aabbccddee
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is maintained
Valid Range within Items
The set parameter is valid until the next specification is made.
Valid Range between Items
The set parameter is valid until the next specification is made.
[Function]
To specify calendar setting
[Format]
<WT>aabbccddee
● Parameter
a {Year Specification} valid range : 00~99
b {Month Specification} valid range : 01~12
c {Day Specification} valid range : 01~31
d {Hour Specification} valid range : 00~23
e {Minute Specification} valid range : 00~59
[Coding Example] 1
st
January 2020 1:13 00sec
<A>
<WT>2001011313
<Z>
[Supplementary Explanation]
1.Optional Calendar IC (a standard for S Series) is required for this command. However, its function becomes invalid if IC is not
available.
Calendar Setting