SATO CL408e - ESC+D Barcode (Ratio 1: 2)

89
9.2 Barcode
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
9.2 ESC+D Barcode (ratio 1 : 2)
ESC+D
HEX Code
ESC
D
Parameter
<1B>16
<44>16
abbcccn~n
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes invalid
[Function]
To specify barcode ratio of 1 : 2 of narrow bar and wide bar.
[Format]
<D>abbcccn~n
● Parameter
a {Barcode Type} = Refer to the following table
b {Thin Bar Width} = 01~12 (dot)
c {Barcode Height} = 001~999 (dot)
n {Print Data} = Data
Barcode Type (The ratio of module structure may not exist based on different barcode)
a
Barcode Type
Content
Ratio
0 NW-7(Codabar)
Set Start/Stop Character at Print Data.
Start/Stop Character becomes {A, B, C, D, E, N, T, a, b, c, d, e, n, t}
e.g.) If barcode print data is{123}, specify it as{A123A}.
Barcode character pitch becomes valid.
Print data can be referred to NW-7 code table.
1:2
1 CODE39
Set Start/Stop character at Print Data.
Start/Stop Character becomes{*}.
e.g.) If barcode print data is{12345}, specify it as{*12345*}.
Barcode character pitch becomes valid.
Print data can be referred to CODE39 code table.
1:2
2 Interleaved 2 of 5
Specify the print data at even number digit.
If odd number digit is specified, fill a “0” at the beginning of print data.
Print data can be referred to Interleaved 2 of 5 code table.
1:2
3 JAN/EAN-13
Guide Bar : YES, Explanation Character : NIL
Print data can be referred to JAN/EAN-13 code table.
Fixed
4 JAN/EAN-8
Guide Bar : YES, Explanation Character : NIL
Print data can be referred to JAN/EAN-8 code table.
Fixed
5 Industrial 2 of 5
Barcode character pitch becomes valid.
Print data can be referred to Industrial 2 of 5 code table.
1:2
6 Matrix 2 of 5
Barcode character pitch becomes valid.
Print data can be referred to Matrix 2 of 5 code table.
1:2
H UPC-A
Guide bar : YES, Explanation Character : NIL
Print data can be referred to UPC-A code table.
Fixed
[Coding Example 1] Barcode Type : NW-7, Thin Bar Width : 03, Barcode Height : 120, Print Data : A1234A
<A>
<V>100<H>100<D>003120A1234A
<Q>2
<Z>
Barcode (ratio 1 : 2)