SATO CL408e - ESC+RC Sheet Unit Cut Number

44
7.21 Modification
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
7.21 ESC+RC Sheet Unit Cut Number
ESC
＋
RC
HEX Code
ESC
RC
Parameter
<1B>16
<52>16<43>16
aa
Default Value
aa＝01
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes invalid
【Function】
To specify sheet cut number of the small label
【Format】
＜RC＞aa
● Parameter
a 「Sheet Cut Number」 ＝ valid range ： 01～99
【Coding Example】
＜A＞
＜RI＞3200,1200,00,00,1600,0600,02,02
＜A1＞12003200
＜
RC
＞
01
＜Z＞
【Supplementary Explanation】
1．Sheet means a certain range specified under Label Size Specification <A1> when it is divided into small labels under Label Size
Specification <R1>.
【Point】
1．Sheet Unit Cut Specification <RC> is a command to specify the sheet cut number of small label at printer driver. Therefore, it cannot
be combined with other standard command.
2
nd
sheet
1
st
sheet
Cut Position
Label Feed Direction
Sheet Unit Cut Number