SATO CL408e - ESC+WS Work Shift Information Print

48
7.25 Modification
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
7.25 ESC+WS Work Shift Information Print
ESC
＋
WS
HEX Code
ESC
WS
Parameter
<1B>16
<57>16<53>16
a
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes invalid
【Function】
To specify printing of work shift information (shift code, printer start use time, shift name).
【Format】
＜WS＞a
● Parameter
a 「Print Content」 ＝ 1：Shift Code
2：Printer Start Use Time
3：Shift Name
【Coding Example】
＜A＞
＜S＞
＜V＞050＜H＞050＜L＞0101＜M＞SHIFT CODE:
＜V＞050＜H＞300＜L＞0202
＜
WS
＞
1
＜V＞100＜H＞050＜L＞0101＜M＞START TIME:
＜V＞100＜H＞300＜L＞0202
＜
WS
＞
2
＜WB＞0
＜V＞150＜H＞050＜L＞0101＜M＞SHIFT NAME:
＜V＞150＜H＞300＜L＞0101
＜
WS
＞
3
＜Q＞1
＜Z＞
【Supplementary Explanation】
1．If work shift information is set invalid at printer LCD hidden setting mode, it will become command error.
2．Before Work Shift Print Specification <WS>, character type to print out the work shift information can be specified by font command
without any print data. If font specification command is not conducted, print it by U character.
3．XU, XS, XM, XB, XL are font type valid for specification.
4．Font specification command to specify character type of Work Shift Print Specification <WS> becomes default value at next item
<A>.
The font specification command for print data will not influence on print content of Work Shift Print Specification <WS>.
Work Shift Information Print