SATO CL408e - ESC+TW Option Waiting Time

228
12.21 System
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se
M-84Pro-2/3/6
LC408e/412e
12.21 ESC+TW Option Waiting Time
ESC+TW
HEX Code
ESC
TW
Parameter
<1B>16
<54>16<57>16
aaa
Default Value
aaa = 005
Valid range and
term of
command
When the power switch is
OFF
The set parameter is maintained.
Valid range within items
The set parameter becomes invalid.
Valid range between items
The set parameter becomes invalid.
[Function]
Specifies waiting time for optional device
[Format]
<TW>aaa
●Parameter
aaa [Waiting time] = Valid range: 005 to 200 (unit: 100ms)
[Coding Example] (waiting time = 1.5 seconds)
<A>
<TW>015
<Z>
[Supplementary Explanation]
1. This command specifies, in Tear-off mode, the waiting time between print completion and Tear-off motion.
2. The set parameter becomes valid soon after receiving the command and will be retained after power off.
3. When it switches to OFFLINE during the waiting time, it forces the printer to operate in Tear-off mode.
Option Waiting Time