SATO CL408e - ESC+BI UCC;EAN128 <For Standard Carton ID

98
9.7 Barcode
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
9.7 ESC+BI
UCC/EAN128 <for Standard
Carton ID>
ESC+BI
HEX Code
ESC
BI
Parameter
<1B>16
<42>16<49>16
aabbbcn~n
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes invalid
[Function]
To specify UCC/EAN128 barcode for Standard Carton ID.
[Format]
<BI>aabbbcn~n
● Parameter
a {Thin Bar Width} = valid range : 01~12 (dot)
b {Barcode Height} = valid range : 001~999 (dot)
c {Barcode Explanation Font Specification} = 0 : No Explanation Words
1 : Explanation Words (on top of barcode)
2 : Explanation Words (bottom of barcode)
n {Print Data} = barcode data (17 digits fixed)
Barcode data can be referred to UCC/EAN128 code table.
EAN128 (barcode for Standard Carton ID) 18 digits fixed
·Identification Data of Continuous Code for Transportation Receptacle
·Package Type
·Country Code, Maker Code
·Sequential Number of Shipping Container
·C/D
* As the C/D is added automatically, therefore the data shall be specified with 17 digits not inclusive of C/D.
[Coding Example] Thin Bar Width:02, Barcode Height:150, Explanation Words:YES (bottom), Print Data:12345678901234567
<A>
<V>100<H>200<BI>03150012345678901234567
<Q>2
<Z>
[Supplementary Explanation]
1. A UCC128 code for Standard Carton ID. When they are used to print areas in medical, perishable foods, florist etc with EAN128, specify the
print data with application identification or separator which fits to each specification by applying CODE128 Barcode <BG>.
2.Start Character Code / Function Character / End Character Code and Identification Code (apply to only “00”) are added automatically.
3.Modulus 10 check character and, modulus 103 check character are created automatically.
4.The sequential number of barcode data is valid.
5.Line pitch of barcode and explanation font is fixed at 10 dot.
6.When explanation font width is larger than barcode width, begins printing from the start position of the barcode.
7.When explanation font width is smaller than barcode width, print the explanation font that fits to the center of barcode.
8.Print the font type of explanation font by OCR-B.
9.When explanation font is not within the print area, it will not be printed out. When explanation font is specified, consider the printing of
explanation font, and then specify the Print Vertical Position Specification <V>and Print Horizontal Position Specification <H>.
UCC/EAN128
<for Standard Carton ID>