SATO CL408e - ESC+L Enlargement

23
7.2 Modify
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
7.2 ESC+L Enlargement
ESC+L
HEX Code
ESC
L
Parameter
<1B>16
<4C>16
aabb
Default Value
aa=01, bb=01
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter is valid until the next specification is made
Valid Range between Items
The set parameter becomes default value a the next item <A>
[Function]
To specify enlargement ratio of print font.
[Format]
<L>aabb
● Parameter
a {Horizontal Direction Enlargement Ratio} = Valid Range: 01~12
b {Vertical Direciton Enlargement Ratio} = Valid Range: 01~12
[Coding Example] Enlargement Ratio at Horizontal Direction : 4 times; Enlargement Ratio at Vertical Direction : 3 times
<A>
<V>100<H>200<P>3<L>0403<XM>ABCD
<Q>2
<Z>
[Supplementary Explanation]
1.Character pitch enlarge at the same time, when Character Pitch Specification <P> is used together, the parameter value of horizontal direction
enlargement ratio which is specified at Enlargement Specification <L> will be reflected at Character Pitch Specification <P> which is set at the
following.
2.If graphic is enlarged, specify the Enlargement Specification <L> right before the graphic print command.
[Point]
1.To expand the enlargement ratio, design the print format not to exceed the print area.
[Valid Command]
Modify
<P>
<RF>
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<OA>
<OB>
<RD>
<$=>
<K1>
*1
<K2>
*1
<K8>
*1
<K9>
*1
<k1>
*1
<k2>
*1
<k8>
*1
<k9>
*1
Graphic
<G>
<GM>
<GP>
Memory Card
<GR>
<GC>
<PY>
*1 Requires optional Kanji ROM. (Not supported for LC408e/412e.)
Enlargement