SATO CL408e - ESC+Q Print Number

15
5.3 Control
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
5.3 ESC+Q Print Number
ESC+Q
HEX Code
ESC
Q
Parameter
<1B>16
<51>16
aaaaaa
Default Value
aaaaaa=1
Valid Range and
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes invalid
[Function]
To specify number of printing
[Format]
<Q>aaaaaa
●Parameter
a {Number to print} = Valid Range : 1~999999
[Coding Example] Print Number Specification:2 pieces
<A>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Supplementary Explanation]
1.As 1 print content that is specified by Data Send Start Specification <A> ~ Data Send End Specification <Z>, several same content
printing will be specified.
2.Must be used before data send complete specification <Z>.
[Point]
1.Number of printing is specified, even if same label is printed, if Sequential Number Specification <F> is used, only the sequential
number value set at the field portion will be printed out.
2.If it is combined with Multiple Cut Specification <~>, print numbers is printed out by calculation from print number times cut specified
value.
Print Number