SATO CL408e - ESC+TK Forced Tear off

229
12.22 System
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
12.22 ESC+TK Forced Tear Off
ESC+TK
HEX Code
ESC
TK
Parameter
<1B>16
<54>16<4B>16
Nil
Default Value
Nil
Valid range and
term of
command
When the power switch is
OFF
The set parameter is not maintained.
Valid range within items
The set parameter becomes invalid.
Valid range between items
The set parameter becomes invalid.
[Function]
Executes Tear off compulsory
[Format]
<TK>
[Coding Example]
<A>
<TK>
<Z>
[Supplementary Explanation]
1. This command can be specified only in Tear off mode.
2. With this command, the printer executes Tear off motion without waiting the time set by command <TW>. If the next data is
received before Tear off motion, Tear off is executed compulsory.
3. This command can not be used in combination with other commands.
[Notes]
This command can be used to save the time set by command <TW>, if it is sure that there is no following item.
Forced Tear Off