SATO CL408e - ESC+KC Kanji Code

30
7.9 Modification
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
7.9 ESC+KC Kanji Code
ESC+KC
HEX Code
ESC
KC
Parameter
<1B>16
<4B>16<43>16
a
Default Value
a=0
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter is valid until the next specification is made
Valid Range between Items
The set parameter becomes default value at next item <A>
[Function]
To specify Kanji Code
Kanji code can be switched over temporarily
[Format]
<KC>a
● Parameter
a ｢Kanji Code Specification｣ = 0 : JIS Code
1 : Shift JIS Code
[Coding Example 1] If Shift JIS is specified
<A>
<KC>1
<V>100<H>200<P>2<L>0202
<K1>H81698A94816A83548367815B
<Q>2
<Z>
[Coding Example 2] If JIS is specified
<A>
<KC>0
<V>100<H>200<P>2<L>0202
<K1>H214A3374214B25352548213C
<Q>2
<Z>
[Supplementary Explanation]
1.It is not necessary to specify normal label print for this command.
2.Multiple specifications within 1 item is applicable too.
3.This command is applicable only when optional Kanji ROM is installed.
Kanji Code