SATO CL408e - ESC+BJF Memory Card Default

231
13.2 Memory Card
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
13.2 ESC+BJF Memory Card Default
ESC+BJF
HEX Code
ESC
BJF
Parameter
<1B>16
<42>16<4A>16<45>16
aaaaaaaa
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched
Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes invalid
[Function]
To specify memory card format (default)
[Format]
<BJF>aaaaaaaa
● Parameter
a {User ID} = specify alphanumeric / symbol at maximum 8 byte
[Coding Example]
<A>
<CC>1
<BJF>satocard
<Z>
[Supplementary Explanation]
1.Optional memory card is required for Card Format Specification <BJF>.
2.Slot number that is registered at Card Slot Specification <CC> shall be specified before the Card Format Specification <BJF>.
3.Card Format Specification <BJF> is a command to format the memory card, cannot be used together with other commands.
4.When memory card is protected, card error occurs without formatting. When wrong format is performed, there is no guaranteed on
deleted content.
5. LC408e/412e does not support optional memory card. Please specify {Flash ROM} with Card Slot Specification <CC>.
Memory Card Default