SATO CL408e - 13 Memory Card Command; ESC+CC Card Slot

230
13. Memory Card Command
13.1 Memory Card
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
13.1 ESC+CC Card Slot
ESC+CC
HEX Code
ESC
CC
Parameter
<1B>16
<43>16<43>16
a
Default Value
a=1
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter is valid until the next specification is done.
Valid Range between Items
The set parameter is valid until the next specification is done.
[Function]
To specify card slot number
[Format]
<CC>a
● Parameter
Card slot specification change by setting “Card Slot 1” from LCD card mode.
Set{MEM SELECT(CC1)}to{CARD}
a {slot number} 1 : card slot
2 : flash ROM
Set{MEM SELECT(CC1)}to{MEMORY}
a {slot number} 1 : flash ROM
2 : card slot
[Coding Exaple]
<A>
<CC>1
<GI>H003003001FF000000~000000FF
<Z>
[Supplementary Explanation]
1.Card slot specification shall be specified when command is specified against memory card. However, when it is Expandable Memory
Specification <EX>, card slot specification does not required.
2.Read / Write error occurs if card is not inserted.
3.Be aware of the time consuming on card access when{Flash ROM}card is used.
4.LC 408e/412e has no memory card slot. Please specify {Flash ROM} with Card Slot Specification <CC>.
Card Slot