SATO CL408e - ESC+~(NULL) Multiple Cut

211
12.8 System
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
12.8 ESC+~(NULL) Multiple Cut
ESC+~(NULL)
HEX Code
ESC
~ (NULL)
Parameter
<1B>16
<7E>16 (<00>16)
aaaa
Default Value
aaaa=1
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter is valid until the next specification is made.
Valid Range between Items
The set parameter becomes default value at next item <A>
[Function]
To specify during cutting with optional unit number of label
[Format]
<~(NULL)>aaaa
● Parameter
a {Print Numbers until it is cut} = valid range : 0~9999
[Coding Example]
<A>
<V>100<H>200<P>2<L>0202<XM>ABC
<Q>4
<~>2
<Z>
ABC
4 Sheet
2 labels
cut
cut
cut
cut
ABC
ABC
ABC
ABC
ABC
ABC
ABC
[Supplementary Explanation]
1.Valid only for cutter specification models
2.Every 1 label will be cut when Multiple Cut Specification <~> is not specified at the Cut Motion Mode.
3.Do not perform cut when it is at a=0
4.The accumulation of print labels and cut numbers shall not exceed the maximum print numbers specification (999999).
5.Multiple Cut Specification <~> is specified after Print Numbers Specification <Q>. Print Number Specification <Q> specifies the sheet
number to be cut.
6.It cannot be used with the combination of the Cut Unit Number Specification <~A>.
Label Feed Direction
Multiple Cut