SATO CL408e - ESC+* Clear (Memory Card)

249
13.16 Memory Card
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
13.16 ESC+* Clear (memory card)
ESC+*
HEX Code
ESC
*
Parameter
<1B>16
<2A>16
a,bbb
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes invalid
[Function]
To clear content registered inside of the memory card (option)
[Format]
<*>a,bbb
● Parameter
a {Clear Item} = G : SATO Graphic
(clear graphic that is registered at the Graphic Register Specification <GI>)
P : PCX File
(clear PCX file that is registered at the Format Register Specification <PI>)
M : BMP File
(clear BMP file that is registered at the Format Register Specification <GT>)
F : Format
(clear format that is registered at the Format Register Specification <YS>)
O : True Type Font
(clear True Type Font that is registered at the True Type Font Register Specification
<BJ>)
R : Form Overlay
(clear Form Overlay that is registered at the Form Overlay Register Specification <&S>)
b {Register No} = valid range : 000~999 (omittable) True Type Font
001~999 (omittable) True Type Font excluded
(when register no is omitted, the entire registered data will be cleared)
[Coding Example 1] clear 001 of SATO Graphic
<A>
<CC1>
<*>G,001
<Z>
[Coding Example 2] clear 002 of PCX File
<A>
<CC1>
<*>P,002
<Z>
[Coding Example 3] clear the entire Form Overlay
<A>
<CC1>
<*>R
<Z>
[Supplementary Explanation]
1.Clear Specification <*> is used with the mark off of Data Send Start Specification <A> ~ Data Send End Specificaiton <Z>.
2.Slot number that is used at Card Slot Specification shall be specified before Clear Specification <*>.
3.LC408e/412e does not support optional memory card. Please specify {Flash ROM} with Card Slot Specification <CC>.
[Point]
1.Use Format Specification <BJF> for clearing memory card.
Clear (memory card)