Date Code 20001006 Breaker Monitor, Metering, and Load Profile Functions 8-33
SEL-351 Instruction Manual
If the requested load profile report rows do not exist, the relay responds:
No Load Profile Data
Determining the size of the Load Profile Buffer
The LDP D command displays maximum number of days of data the relay may acquire with the
present settings, before data overwrite will occur.
=>LDP D <ENTER>LDP D <ENTER>
There is room for a total of 45 days of data in the load profile buffer,
with room for 21 days of data remaining.
Clearing The Load Profile Buffer
Clear the load profile report from nonvolatile memory with the LDP C command as shown in the
following example:
=>LDP C <ENTER>LDP C <ENTER>
Clear the load profile buffer
Are you sure (Y/N) ? Y <ENTER>
Clearing Complete
Changing the LDLIST setting will also result in the buffer being cleared.
Courtesy of NationalSwitchgear.com
To Next Page
Loading...
