9-43
Positional deviation measurement
9
The numbers ranging from 0 to 7 in front of the characters are registration numbers.
Continued from the previous page
Continued on the following page
Return to the MAIN OPS MENU
DEL.
[OUTPUT CONDITIONS]
(TYPE00-MEAS.0-POS-DEVIATION)
1PAGE NO.
0(0~4) REG.NO YES
2SET POSITION
MOVE
3INPUT SIGNAL
REGT.NO.00(0~7)
MATCH M0(0~1) CRD.X0(0~1) CRD.Y0(0~1)
DEVIAT-x0(0~1) DEVIAT-y0(0~1) AGL-DV B
CAL N00(0~15) AUXRLY C000(0~127)
4LOGIC SYMBOL
5OUTPUT SIGNAL
AUX.RLYC000(0~127) DEL.
6UPPER MENU
[PAGE0]
INPUT0
LOGIC
INPUT1
LOGIC
INPUT2
LOGIC
INPUT3
LOGIC
10 234567OUT
· The input signals which may be set depend on the selection made at item 3 as follows.
· For more information on output conditions, see the “PC Function” in Chapter 10.
Degree of match M
Coordinates X/Y
Coordinate deviation x/y
Angular deviation B
Calculation N
Auxiliary relay C
0M0 to 7M0
0X0 to 7X0/0Y0 to 7Y0
0x0 to 7x0/0y0 to 7y0
0B to 7B
N00 to N15
C000 to C127
0M1 to 7M1
0X1 to 7X1/0Y1 to 7Y1
0x1 to 7x1/0y1 to 7y1
3INPUT SIGNAL Model 0 Model 1
To Next Page
Loading...
Need help?
General