SICK Flexi Soft User Manual

Figure 64: Removing the modules from the DIN mounting rail
3.
Push t
he module down at the back (1). With the module still pushed down, move
it in the direction of the arrow to remove it from the DIN mounting rail (2).
11.2 Disposal
Approach
►
Al
ways dispose of unusable devices in accordance with national waste disposal
regulations.
Complementary information
SIC
K will be glad to help you dispose of these devices on request.
DECOMMISSIONING 11
8012478/1IG6/2023-02-24 | SICK O P E R A T I N G I N S T R U C T I O N S | Flexi Soft Modular Safety Controller
129
Subject to change without notice

SICK Flexi Soft Specifications

General

Safety Integrity Level (SIL)	SIL3
Performance Level (PL)	PL e
Programming	Flexi Soft Designer
Power Supply	24 V DC
Safety Protocols	PROFIsafe, CIP Safety
Protection Class	IP20
Number of I/Os	Configurable
Operating Voltage	24 V DC
Power Consumption	Depends on configuration
Dimensions (W x H x D)	Varies depending on the module configuration
Weight	Varies depending on the module configuration
Number of Safety Inputs	Configurable
Number of Safety Outputs	Configurable
Safety Standard	IEC 61508, IEC 62061, ISO 13849
Operating Temperature	0°C to +55°C
Response Time	< 10 ms (typical)
Storage Temperature Range	-25°C to +70°C
Relative Humidity	15 % ... 95 %, non-condensing