SICK Flexi Soft User Manual

14 Accessories
14.1 Accessories for the safety controller
Table 197: Accessories for the safety controller
Part Type code Part number
Plug-in spring terminals – 2045890
Plug-in screw terminals – 2045891
EFI cable thin, 6.9 mm, PVC, sold by the meter – 6030921
Flexi Line cable, shielded, twisted pair, PVC,
2×0.22mm²
(AWG23), sold by the meter
– 6029448
Flexi Link cable, shielded, twisted pair,
2×2×0.34mm² (AWG22), sold by the meter
– 6034249
Configuration cable
2 m, M8, D
-Sub
– 6021195
Configuration cable
3 m, U
SB-A, USB Mini-B
– 6042517
Configuration cable
3 m, M8, an
gled, open end
– 6036342
Configuration cable, M8 on USB-A, 2 m DSL-8U04G02M025KM1 6034574
Configuration cable, M8 on USB-A, 10 m DSL-8U04G10M025KM1 6034575
14.2 Accessories for the motion control module
Encoder/motor feedback connection units
T
able 198: Encoder/motor feedback connection unit
Part Protective
c
oating
1)
Type code Part number
Facility for connecting two encoder/motor
feedback systems
Connection to the FX3-MOCx motion con‐
trol module: D-sub, female connector, 15-
pin
No FX3-EBX1 2079867
Facility for connecting one encoder/motor
f
eedback system
Connection to the FX3-MOCx motion con‐
trol module: D-sub, female connector, 15-
pin
Connection for additional encoder/motor
feedback connection units: D-sub, female
connector, 9-pin
No FX3-EBX3 2068728
Facility for connecting two encoder/motor
f
eedback systems
Connection to the FX3-MOCx motion con‐
trol module: D-sub, female connector, 15-
pin and HD D-sub, female connector, 15-
pin
No FX3-EBX4 2068729
Yes FX3-EBX400012 2117330
1)
For more challenging ambient conditions (e.g., resistance to sulfur).
14 ACCESSORIES
182
O P E R A T I N G I N S T R U C T I O N S | Flexi Soft Modular Safety Controller 8012478/1IG6/2023-02-24 | SICK
Subject to change without notice

SICK Flexi Soft Specifications

General

Safety Integrity Level (SIL)	SIL3
Performance Level (PL)	PL e
Programming	Flexi Soft Designer
Power Supply	24 V DC
Safety Protocols	PROFIsafe, CIP Safety
Protection Class	IP20
Number of I/Os	Configurable
Operating Voltage	24 V DC
Power Consumption	Depends on configuration
Dimensions (W x H x D)	Varies depending on the module configuration
Weight	Varies depending on the module configuration
Number of Safety Inputs	Configurable
Number of Safety Outputs	Configurable
Safety Standard	IEC 61508, IEC 62061, ISO 13849
Operating Temperature	0°C to +55°C
Response Time	< 10 ms (typical)
Storage Temperature Range	-25°C to +70°C
Relative Humidity	15 % ... 95 %, non-condensing