SICK Flexi Soft User Manual

Part Protective
c
oating
1)
Type code Part number
CANopen gateway No FX0-GCAN00000 1044076
Yes FX0-GCAN00010 1118379
DeviceNet gateway No FX0-GDEV00000 1044077
CC-Link gateway No FX0-GCC100200 1085195
EFI-pro gateway No FX3-GEPR00000 1069070
Yes FX3-GEPR00010 1112296
1)
For more challenging ambient conditions (e.g., resistance to sulfur).
Expansion modules
T
able 195: Ordering data for extension modules
Part Protective
c
oating
1)
Type code Part number
I/O module
8 safety inputs, 4 safety outputs, plug-in
dual level spring terminals
No FX3-XTIO84002 1044125
Yes FX3-XTIO84012 1050618
I/O module
8 s
afety inputs, plug-in dual level spring
terminals
No FX3-XTDI80002 1044124
Yes FX3-XTDI80012 1050617
I/O module
8 s
afety inputs, 4 or 6 non-safe outputs,
plug-in dual level spring terminals
No FX3-XTDS84002 1061777
Yes FX3-XTDS84012 1112301
I/O module
6 or 8 non-
safe inputs, 8 or 6 non-safe
outputs, plug-in dual level spring termi‐
nals
No FX0-STIO68002 1061778
Yes FX0-STIO68012 1112297
Motion Control
F
or connecting two encoders
No FX3-MOC000000 1062344
Motion Control
F
or connecting two encoders
No FX3-MOC100000 1057833
Yes FX3-MOC100010 1112300
Analog input module
Connection of two analog sensors
No FX3-ANA020002 1051134
Yes FX3-ANA020012 1112299
1)
For more challenging ambient conditions (e.g., resistance to sulfur).
Relay modules
T
able 196: Ordering data of relay modules
Part Protective
c
oating
1)
Type code Part number
Relay module
2 normally open contacts and 1 24V DC
signal output, plug-in spring terminals
No UE410-2RO4 6032677
Yes UE410-2RO401 1118380
Relay module
4 nor
mally open contacts and 2 24V DC
signal outputs, plug-in spring terminals
No UE410-4RO4 6032676
Yes UE410-4RO401 6053182
Safety relay
Out
put expansion module for OSSDs
2 enabling current paths
No RLY3-OSSD1 1085343
13 ORDERING INFORMATION
180
O P E R A T I N G I N S T R U C T I O N S | Flexi Soft Modular Safety Controller 8012478/1IG6/2023-02-24 | SICK
Subject to change without notice

SICK Flexi Soft Specifications

General

Safety Integrity Level (SIL)	SIL3
Performance Level (PL)	PL e
Programming	Flexi Soft Designer
Power Supply	24 V DC
Safety Protocols	PROFIsafe, CIP Safety
Protection Class	IP20
Number of I/Os	Configurable
Operating Voltage	24 V DC
Power Consumption	Depends on configuration
Dimensions (W x H x D)	Varies depending on the module configuration
Weight	Varies depending on the module configuration
Number of Safety Inputs	Configurable
Number of Safety Outputs	Configurable
Safety Standard	IEC 61508, IEC 62061, ISO 13849
Operating Temperature	0°C to +55°C
Response Time	< 10 ms (typical)
Storage Temperature Range	-25°C to +70°C
Relative Humidity	15 % ... 95 %, non-condensing