SICK Flexi Soft User Manual

•
M4000
•
C4000
A
CR cannot be used to restore the configuration of the following devices:
•
UE product family (UE402/UE403, UE44xx, UE41xx, UExx40)
•
Devices in the Flexi Soft product family (FX3-CPUx)
Please also refer to the information in the operating instructions for the EFI-enabled
devices you are using.
The “Flexi Soft in the Flexi Soft Designer Configuration Software” operating instructions
contain more information on using the ACR function.
3 P
RODUCT DESCRIPTION
48
O P E R A T I N G I N S T R U C T I O N S | Flexi Soft Modular Safety Controller 8012478/1IG6/2023-02-24 | SICK
Subject to change without notice

SICK Flexi Soft Specifications

General

Safety Integrity Level (SIL)	SIL3
Performance Level (PL)	PL e
Programming	Flexi Soft Designer
Power Supply	24 V DC
Safety Protocols	PROFIsafe, CIP Safety
Protection Class	IP20
Number of I/Os	Configurable
Operating Voltage	24 V DC
Power Consumption	Depends on configuration
Dimensions (W x H x D)	Varies depending on the module configuration
Weight	Varies depending on the module configuration
Number of Safety Inputs	Configurable
Number of Safety Outputs	Configurable
Safety Standard	IEC 61508, IEC 62061, ISO 13849
Operating Temperature	0°C to +55°C
Response Time	< 10 ms (typical)
Storage Temperature Range	-25°C to +70°C
Relative Humidity	15 % ... 95 %, non-condensing