Severity Warning
Facility local0
Log text {protocol}: Failed to save file type ConfigPack.
Standard IEC 62443-3-3 Reference: SR7.3
Description Backup failed
Example TFTP: Failed to save file type ConfigPack.
Severity Warning
Facility local0
Restoration of the automation system
Log text {protocol}: Loaded file type Firmware {version} (restart required).
Standard IEC 62443-3-3 Reference: SR7.4
Description Firmware update was successfully uploaded.
Example TFTP: Loaded file type Firmware V02.00.00 (restart required).
Severity Info
Facility local0
Log text {protocol}: User {user name} loaded file type Firmware {version} (restart required).
Standard IEC 62443-3-3 Reference: SR7.4
Description Firmware update was successfully uploaded.
Example WBM: User admin loaded file type Firmware V02.00.00 (restart required).
Severity Info
Facility local0
Log text {protocol}: Failed to load file type Firmware.
Standard IEC 62443-3-3 Reference: SR7.4
Description Error loading the firmware update.
Example WBM: Failed to load file type Firmware.
Severity Warning
Facility local0
Log text {protocol}: Loaded file type Config (restart required).
Standard IEC 62443-3-3 Reference: SR7.4
Description The configuration is applied.
Example TFTP: Loaded file type Config (restart required).
Severity Info
Facility local0
Appendix E
E.3 Syslog messages
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
362 Configuration Manual, 11/2019, C79000-G8976-C485-03
To Next Page
Loading...
Need help?
General
