Siemens SINUMERIK 810D

14
03.96
14.2 Machine data access via part program
14-303
 Siemens AG 2000 All Rights Reserved
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
Assignment of channel-specific machine data:
CHANDATA(1) Assignment channel 1
$MC_CHAN_NAME=‘CHAN1‘ Channel name for channel 1
$MC_AXCONF_GEOAX_NAME_TAB[1]=‘Y‘ Name of the 2nd geometry
axis in channel 1 is Y
...
R10 = 33.75 R10 from channel 1
...
CHANDATA(2) Assignment channel 2
$MC_CHAN_NAME=‘CHAN2‘ Channel name for channel 2
...
R10 = 96.88 R10 from channel 2
...
J
14 Miscellaneous