Detailed description
2.12 Block descriptions
Basic logic functions: PLC Basic program powerline (P3 pl)
262 Function Manual, 11/2006, 6FC5397-0BP10-2BA0
2.12.28.3 Checkback signals from user interface for controlling displays
Operating modes and machine functions
Destination:
MCP - Output
Source:
Interface DB (parameter ModeGroupNo)
representation for mode group 1
AUTOMATIC DB11, ... DBX7.0
MDA DB11, ... DBX6.1
JOG DB11, ... DBX6.2
REPOS DB11, ... DBX7.1
REF DB11, ... DBX7.2
TEACH IN DB11, ... DBX7.0
WCS/MCS - output is operated through key actuation.
Call example
CALL FC 26 (
//Machine control panel of the HPU/HT6
//signals to interface
BAGNo := B#16#1, //Mode group no. 1
ChanNo := B#16#1); //Channel no. 1
With these parameter settings, the signals from the first parameterized machine control
panel are sent to the 1st mode group, the 1st channel and all axes.
To Next Page
Loading...
Need help?
General
