Siemens SINUMERIK 810D Function Manual

Basic logic functions: Feeds (V1)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
71
Index
A
Acceleration correction
in the part program/synchronized action, 50
Axis/spindle disable ?DB31, ... DBX1.3, 32
C
CFC, 10
CFCIN, 10
CFTCP, 10
Constant cutting rate (G96), 13
Constant cutting rate G96, G961, G962
Geometry axis as transverse axis, 14
Interrupts, 17
Constant speed G97, G971, 14
D
Deletion of distance-to-go, 41
Diameter programming for one or more transverse
axes, 13
Dry run feedrate, 38
Dynamic response of an axis/spindle, 48
E
end-of-motion criterion
Programmable in program/synchronized action, 52
F
Feed disable, 31
Feedrate disable DB21, ... DBX6.0, 32
Feedrate FB
Non-modal, 47
Feedrate for chamfer/rounding, 46
Feedrate override switch, 33
Feedrate/spindle stop, 31
Feedrates
Dry run feedrate, 38
Feed disable, 31
Feed override, 33, 37
Feedrate control, 30
Feedrate/spindle stop, 31
feedrates in one block, 40
G93, G94, G95, 11
Path feedrate F, 9
Rigid tapping G331/G332, 28
Spindle override, 36
Thread cutting G33, 17
Fixed feedrate values, 45
G
G96, G961, G97, G971, 13
I
Inverse-time feedrate (G93), 11
L
Linear feedrate (G94), 11
M
Masterslave switchover with G96, G961, 17
MD10704, 39
MD10710, 15
MD11410, 18, 23
MD11550, 28
MD12000, 35
MD12010, 35
MD12020, 34
MD12030, 34
MD12040, 34
MD12050, 34
MD12060, 36
MD12070, 36
MD12080, 37
MD12082, 35
MD12100, 37
MD12200, 46
MD12202, 45

Siemens SINUMERIK 810D Specifications

General

Brand	Siemens
Model	SINUMERIK 810D
Category	Control Unit
Language	English