Siemens SINUMERIK 810D

Basic logic functions: Axes, coordinate systems, frames (K2)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
141
Examples
4
4.1 Axes
Axis configuration for a 3axis milling machine with rotary table
1. Machine axis: X1 Linear axis
2. Machine axis: Y1 Linear axis
3. Machine axis: Z1 Linear axis
4. Machine axis: B1 Rotary table (for turning for multiface machining)
5. Machine axis: W1 Rotary axis for tool magazine (tool revolver)
6. Machine axis: C1 (Spindle)
1. Geometry axis: X (1. channel)
2. Geometry axis: Y (1. channel)
3. Geometry axis: Z (1. channel)
1. Special axis: B (1. channel)
2. Special axis: WZM (1. channel)
1. spindle: S1/C (1. channel)