Detailed Description
2.4 Acceleration (B2)
Basic logic functions: NC/PLC interface signals (Z1)
70 Function Manual, 11/2006, 6FC5397-0BP10-2BA0
DB31, ...
DBX60.7
Position reached with exact stop fine
Edge evaluation: no Signal(s) updated: cyclic
Signal state 1 or
edge change
0 → 1
Refer to DB31, ... DBX60.6 (position reached with exact stop coarse).
Signal state 0 or
edge change
1 → 0
Refer to DB31, ... DBX60.6 (position reached with exact stop coarse).
Signal irrelevant for
...
Rotary axes that are programmed as rounding axes.
Corresponding to .... MD36010 $MA_STOP_LIMIT_FINE (exact stop fine)
2.4 Acceleration (B2)
No signal descriptions required.
2.5 Diagnostic tools (D1)
No signal descriptions required.
To Next Page
Loading...
