Data lists
5.2 Setting data
Basic logic functions: Diagnostic tools (D1)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
51
5.2 Setting data
5.2.1 Axis/spindle-specific setting data
Number Identifier: $SA_ Description
43510 FIXED_STOP_TORQUE Fixed stop clamping torque
5.3 Signals
5.3.1 Signals to axis/spindle
DB number Byte.Bit Description
31, ... 16.0 - 16.2 Actual gear stages A, B, C
31, ... 21.0 - 21.2 Parameter set selection A, B, C
31, ... 21.3 - 21.4 Motor selection A, B
31, ... 21.7 Pulse enable
To Next Page
Loading...
