Siemens SINUMERIK 810D

Detailed description
2.4 Frames
Basic logic functions: Axes, coordinate systems, frames (K2)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
81
• $P_ACTFRAME
The resulting current complete frame $P_ACTFRAME is now a chain of all system
frames, basic frames, the current settable frame and the programmable frame. The
current frame is always updated whenever a frame component is changed.
The current complete frame is calculated according to the formula below:
$P_ACTFRAME = $P_PARTFRAME : $P_SETFRAME : $P_EXTFRAME :
$P_ISO1FRAME : $P_ISO2FRAME : $P_ISO3FRAME :
$P_ACTBFRAME : $P_IFRAME :
$P_TOOLFRAME : $P_WPFRAME : $P_TRAFRAME:
$P_PFRAME : $P_ISO4FRAME : $P_CYCFRAME
2.4.5.8 $P_ACTFRAME
The resulting current complete frame $P_ACTFRAME is now a chain of all system frames,
basic frames, the current settable frame and the programmable frame. The current frame is
always updated whenever a frame component is changed.
The current complete frame is calculated according to the formula below:
$P_ACTFRAME = $P_PARTFRAME : $P_SETFRAME : $P_EXTFRAME :
$P_ACTBFRAME : $P_IFRAME :
$P_TOOLFRAME : $P_WPFRAME : $P_TRAFRAME:
$P_PFRAME : $P_CYCFRAME