Brief Description
Basic logic functions: Feeds (V1)
6 Function Manual, 11/2006, 6FC5397-0BP10-2BA0
Axis assignment for feedrates
Feedrates can be assigned variably to axes according to technological requirements.
The following assignments are supported:
• Separate feedrates for working plane and infeed axis
• Variable axis assignment for path feedrate
• Feedrate for positioning axes
Feedrate control
The programmed feedrate can be modified for adaptation to changes in technological
conditions during machining or for test purposes.
• Via the machine control panel
• Via the operator panel
• Via the PLC
• Via a program command
To Next Page
Loading...
