Siemens SITRANS FUG1010 IP65 NEMA 4X - Page 261

1010GCNFM-3C
Index
Index-7
Preparing The Pipe Surface 5-3
Pressure/Temperature
Index Array 4-17
Print Site Setup 6-10
PSIA 4-14
R
[Recall Site] Command 4-3
Recall Site Setup 4-3
Reference Hole 5-6
Reflect Mode
Mounting Frames and Spacer Bar 5-4
Reflect Mount
Installation With Mounting Track 5-10
Relay Option List 4-59
Relay Setup 4-58
Assigning Relay Functions 4-59
Resultant Data 3-7
Reynolds Number 4-13
Compensation Factors 6-5
RS-232 Setup Menu 4-87
Baud Rate 4-88
Parity 4-88
RTD
Calibrate Menu 4-85
Calibration By Data Entry 4-86
Entering Current RTD Temperature 4-86
RTS Key Time 4-90
Setting RTS Key Time 4-90
S
Safety Considerations 1-1
Save and Recall Data Sites 4-3
Save/Rename Site Command 4-5
Scrollable Option List 3-5
Selecting
Channel/Path 3-4, 3-8, 4-2
Data Options 4-53
Datalogger Data Items 4-53
Datalogger Event Items 4-54
Deselecting, Selecting 4-54
Meter Type 3-8
Memory Mode 4-34
Path 3-8
Time Average 4-33
Zero Flow Adjust Menu 4-28
Serial Data Port (see also RS-232) 4-87
Setting Analog Output Span 4-57
Setting Clock 4-87
Setting The Log Time Interval 4-54
Single Channel 2-1
Site Programming 4-65
Site Setup 1-1
Site Setup Reference Tables 6-5