Siemens SITRANS FUG1010 IP65 NEMA 4X - Page 262

1010GCNFM-3C
Index
Index-8
SmartSlew 6-3
Software Version 3-3
Span, Analog Output 4-42, 4-57
Specific Gravity 1-3
Specific Heat Ratio 4-14
Spacing Guide Part Numbers 5-6
Spacing Method, Transducers (see Section 5)
Standard Volume Compensation 1-3
StripChart Setup 6-9
StripChart Setup Menu 4-49
System Information 4-91
Checksum, Code, Op System P/N, Reset Date/Time, System Time, Version 4-91
System Performance 6-1
Accuracy, Repeatability 6-2
T
Terminology Chart For 1010 Series 6-6
Test Facilities 6-10
Test Facilities Commands 4-69
Makeup 4-74
Test Facilities Menu 4-69
The Flow/Total Units Menu Structure 4-36
Theory of Operation 1-2
Time Average 4-33
Time Base 4-49
Total Resolution 4-38
Total Volume Units 4-37
To Change Default 4-38
Totalizer
Controls 4-35
Totalizer Display Modes
NEGFLOW, NETFLOW, POSFLOW 4-35, 4-39
Totalizer Mode
Selecting 4-39
Totalizer Scale
Selecting A Different Scale 4-38
TOTCNT 4-38
Technical Assistance 6-1
Transducer
Installation 5-1
Transducer Pick/Install Menu 4-20
Transit-time 1-2
Transmit/Receive Functions 1-2
Troubleshooting Tips 4-74
Flow Computer Messages 4-75
Using F4 Sequence 4-75
Two-Phase Liquids 6-4
Overflow Buffer 4-38
Turbulence % 4-46, 6-3
U
Ultrasonic Transit-Time 1-2
Units, Flow/Total 4-35
Units, Flow Volume 4-36