15.Use the spacer bar as a straight edge, align the mounted sensor's white dot and the pencil
dot and draw a line across the dots (see "B" below). Set spacer bar aside.
① Sensor 1 ⑤ Sensor Edge Line
② Pipe ⑥ Spacer Bar
③ Place dot below white dot ⑦ Dot
④ Sensor 2 ⑧ Line
⑨ Mylar Spacing Guide
Connecting
5.2 Sensor Wiring
FUP1010 IP67 Portable Flowmeter
Operating Instructions, 02/2010, A5E02951522A Revision 01
45
To Next Page
Loading...
