[Install Xdcr] menu screen. Note the automatic assignment of model numbers for the sensor
and mounting track, plus the designation of the Number Index.
① Automatic selection of mounting track part number , mount mode and Number Index
The combination of two Model 1012TP Mounting Tracks and a spacer guide is the
recommended way to mount sensors in the Direct Mode. This method ensures that sensors
will align exactly 180° from each other and remain spaced the proper distance apart.
The Direct Mount configuration uses a set of two track rail assemblies; one for each sensor,
installed 180° apart on the pipe. The set includes:
Connecting
5.2 Sensor Wiring
FUP1010 IP67 Portable Flowmeter
52
Operating Instructions, 02/2010, A5E02951522A Revision 01
To Next Page
Loading...
