SimCom SIM700C User Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 141 2018-05-08
Max Response
Time
-
Reference
8.2.22 AT+CIPDPDP Set Whether to Check State of GPRS Network Timing
AT+CIPDPDP Set Whether to Check State of GPRS Network Timing
Test Command
AT+CIPDPDP=?
Response
+CIPDPDP: (list of supported<mode>s, list of supported <interval>,
list
of supported <timer>)
OK
Parameters
See Write Command
Read Command
AT+CIPDPDP?
Response
+CIPDPDP: <mode>,<interval>,<timer>
OK
Parameters
See Write Command
Write Command
AT+CIPDPDP=<
mode>[,<interval
>,<timer>]
Response
OK
ERROR
Parameters
<mode>
0 Not set detect PDP
1 Set detect PDP
<interval>
1<=interval<=180(s), default value is 10.
<timer>
1<=timer<=10, default value is 3.
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
If "+PDP: DEACT" urc is reported because of module not attaching to gprs
for a certain time or other reasons, user still needs to execute
"AT+CIPSHUT" command makes PDP context come back to original state.
SIMCOM COMFIDENTIAL FILE

SimCom SIM700C Specifications

General

Brand	SimCom
Model	SIM700C
Category	Control Unit
Language	English