SimCom SIM700C

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 142 2018-05-08
8.2.23 AT+CIPMODE Select TCPIP Application Mode
AT+CIPMODE Select TCPIP Application Mode
Test Command
AT+CIPMODE=
?
Response
+CIPMODE: (0-NORMAL MODE,1-TRANSPARENT MODE)
OK
Parameters
See Write Command
Read Command
AT+CIPMODE?
Response
+CIPMODE: <mode>
OK
Parameters
See Write Command
Write Command
AT+CIPMODE=
<mode>
Response
OK
ERROR
Parameters
<mode> 0 Normal mode
1 Transparent mode
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
8.2.24 AT+CIPCCFG Configure Transparent Transfer Mode
AT+CIPCCFG Configure Transparent Transfer Mode
Test Command
AT+CIPCCFG=
?
Response
+CIPCCFG:
(NmRetry:3-8),(WaitTm:1-10),(SendSz:1-1460),(esc:0,1) ,(Rxmode:0,1),
(RxSize:50-1460),(Rxtimer:20-1000)
OK
Parameters
See Write Command
Read Command
AT+CIPCCFG?
Response
+CIPCCFG:
<NmRetry>,<WaitTm>,<SendSz>,<esc>,<Rxmode>,<RxSize>,<Rxtime
r>
SIMCOM COMFIDENTIAL FILE