SimCom SIM700C User Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 145 2018-05-08
+CIPUDPMODE: 0,<mode>[,<IP address>,<Port>]
+CIPUDPMODE: 1,<mode>[,<IP address>,<Port>]
+CIPUDPMODE: 2,<mode>[,<IP address>,<Port>]
+CIPUDPMODE: 3,<mode>[,<IP address>,<Port>]
+CIPUDPMODE: 4,<mode>[,<IP address>,<Port>]
+CIPUDPMODE: 5,<mode>[,<IP address>,<Port>]
+CIPUDPMODE: 6,<mode>[,<IP address>,<Port>]
+CIPUDPMODE: 7,<mode>[,<IP address>,<Port>]
OK
Parameter
See Write Command
Write Command
1) For single IP
connection
(+CIPMUX=0)
AT+CIPUDPMOD
E=<mode>[,<IP
address>,<Port>]
2) For multi IP
connection
(+CIPMUX=1)
AT+CIPUDPMOD
E=<n>,<mode>[,<I
P
address>,<Port>]
Response
OK
ERROR
<n> 0-7 A
numeric parameter which indicates the connection
number
<mode> 0 UDP Normal Mode
1 UDP Extended Mode
2 Set UDP address to be sent
<IP address> A string parameter which indicates remote IP address
<port> Remote port
Parameter Saving
Mode
NO_SAVE
Max Response Time
-
Reference Note
8.2.27 AT+CIPRXGET Get Data from Network Manually
AT+CIPRXGET Get Data from Network Manually
Test Command
AT+CIPRXGET
=?
Response
If single IP connection (+CIPMUX=0)
+CIPRXGET: (list of supported <mode>s),(list of supported <reqlength>)
OK
If multi IP connection (+CIPMUX=1)
+CIPRXGET: (list of supported <mode>s), (list of supported <id>s), (
list
of supported <reqlength>)
SIMCOM COMFIDENTIAL FILE

SimCom SIM700C Specifications

General

Brand	SimCom
Model	SIM700C
Category	Control Unit
Language	English