SimCom SIM700C

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 170 2018-05-08
Parameter
See Write Command
Write Command
AT+FTPCID=<v
alue>
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<value> Bearer profile identifier refer to AT+SAPBR
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
11.2.6 AT+FTPREST Set Resume Broken Download
AT+FTPREST Set Resume Broken Download
Test Command
AT+FTPREST=
?
Response
OK
Read Command
AT+FTPREST?
Response
+FTPREST: <value>
OK
Parameters
See Write Command
Write Command
AT+FTPREST=
<value>
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<value> Broken point to be resumed
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
SIMCOM COMFIDENTIAL FILE