SimCom SIM700C

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 205 2018-05-08
15.2 Detailed Descriptions of Commands
15.2.1 AT+CGNSPWR GNSS Power Control
15.2.2 AT+CGNSINF GNSS Navigation Information Parsed From NMEA Sentences
AT+CGNSINF GNSS Navigation Information Parsed From NMEA Sentences
Test Command
AT+CGNSINF=?
Response
OK
Parameters
See Execution Command
Execution
Command
Response
+CGNSINF: <GNSS run status>,<Fix status>,<UTC date & Time>,
AT+CGNSPWR GNSS Power Control
Test Command
AT+CGNSPWR
=?
Response
+CGNSPWR: (list of supported <mode>s )
OK
Parameters
See Write Command
Read Command
AT+CGNSPWR?
Response
TA returns the current status of GNSS Power supply
+CGNSPWR: <mode>
OK
Parameters
See Write Command
Write Command
AT+CGNSPWR
=<mode>
Response
OK
or
ERROR
Parameters
<mode>
0 Turn off GNSS power supply
1 Turn on GNSS power supply
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference NMEA data will not out put to usb’
s NMEA port when set
AT+CGNSPWR=1 throug
h uart port except config it by
AT+CGNSCFG=1.
SIMCOM COMFIDENTIAL FILE