SimCom SIM700C

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 214 2018-05-08
15.2.11 AT+CGNSXTRA GNSS XTRA Function Open
15.2.12 AT+CGNSCPY GNSS XTRA File Copy
AT+CGNSCPY GNSS XTRA File Copy
Test Command
AT+CGNSCPY=
?
Response
OK
Parameters
See Execution Command
Execution
Command
AT+CGNSCPY
Response
+CGNSCPY: <ret>
OK
AT+CGNSXTRA GNSS XTRA Function Open
Test Command
AT+CGNSXTRA
=?
Response
+CGNSXTRA: (0-1)
OK
Parameters
See Write Command
Read Command
AT+CGNSXTRA
?
Response
TA returns the current status of configure
+CGNSXTRA: <enable>
OK
Parameters
See Write Command
Write Command
AT+CGNSXTRA
=<enable>
Response
OK
or
ERROR
Parameters
<enable>
0 Disable XTRA function
1 Enable XTRA function
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference
SIMCOM COMFIDENTIAL FILE