SimCom SIM700C

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 91 2018-05-08
Parameters
See Write Command
Read Command
AT+SLEDS?
Response
+SLEDS: <mode>,<timer_on>,<timer_off>
OK
Parameters
See Write Command
Write Command
AT+SLEDS=<m
ode>,<timer_on>
,<timer_off>
Response
OK
ERROR
Parameters
<mode>
1 Set the timer period of net light while SIM7000 series
does not
register to the network
2 Set the timer period net light while SIM7000 series has already
registered to the network
3 Set the timer period net light while SIM7000 series is in the state of
PPP communication
<timer_on>
Timer period of "LED ON" in decimal format which range is 0 or
40-65535(ms)
<timer_off>
Timer period of "LED OFF" in decimal format which range is 0 or
40-65535(ms)
Parameter Saving
Mode
-
Max Response
Time
-
Reference Note
The default value is :
<mode>,<timer_on>,<timer_off>
1,64,800
2,64,3000
3,64,300
5.2.14 AT+CNETLIGHT Close the Net Light or Open It to Shining
AT+CNETLIGHT Close the Net Light or Open It to Shining
Test Command
AT+CNETLIGH
T=?
Response
+CNETLIGHT: (0,1)
OK
SIMCOM COMFIDENTIAL FILE