SimCom SIM700C User Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 22 2018-05-08
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference
V.25ter
Note
To return from Command mode back to data mode: Enter ATO.
2.2.9 ATO Switch from Command Mode to Data Mode
ATO Switch from Command Mode to Data Mode
Execution
Command
ATO[n]
Response
TA resumes the connection and switches back from command mode
to data
mode.
CONNECT
If connection is not successfully resumed
ERROR
else
TA returns to data mode from command mode CONNECT <text>
Note: <text> only if parameter setting ATX>0
Parameter
<n> 0 Switch from command mode to data mode.
Parameter Savin
g
Mode
NO_SAVE
Max Response
Time
-
Reference
V.25ter
Note
2.2.10 ATQ Set Result Code Presentation Mode
ATQ Set Result Code Presentation Mode
Execution
Command
ATQ<n>
Response
This parameter setting determines whether or not the TA transmits any result
code
to the TE. Information text transmitted in response is not affected by
this setting.
If <n>=0:
OK
If <n>=1:
(none)
Parameters
<n> 0 TA transmits result code
SIMCOM COMFIDENTIAL FILE

SimCom SIM700C Specifications

General

Brand	SimCom
Model	SIM700C
Category	Control Unit
Language	English