SimCom SIM700C

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 193 2018-05-08
Write Command
AT+MIPLCREAT
E=<size>,<config>,
<index>,<totalsize>
,<flag>
Response
<ref>
OK
Parameters
<size> Current <config> size
<config> Config in hex format
<index> Current config index
<totalsize> Total config size
<flag> Indicate the input is over or not
Parameter Saving
Mode
NO_SAVE
Max Response Time
-
Reference Note
13.2.2 AT+MIPLDELETE Delete OneNet configuration
AT+MIPLDELETE Delete OneNet configuration
Test Command
AT+MIPLDELET
E=?
Response
+MIPLDELETE: <ref>
OK
Parameters
See Write Command
Write Command
AT+MIPLDELET
E=<ref>
Response
OK
Parameters
<ref> Config id
Parameter Saving
Mode
NO_SAVE
Max Response Time
-
Reference
Note
13.2.3 AT+MIPLOPEN Connect to OneNet
AT+MIPLOPEN Connect to OneNet
Test Command
AT+MIPLOPEN=?
Response
+MIPLOPEN: <ref>,<lifetime>,<param>
OK
Parameters
See Write Command
SIMCOM COMFIDENTIAL FILE