SimCom SIM700C User Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 148 2018-05-08
Parameters
See Write Command
Write Command
AT+CIPRDTIM
ER=<rdsigtimer
>,<rdmuxtimer>
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<rdsigtimer> Remote delay timer of single connection. Default value is
2000.
<rdmuxtimer> Remote delay timer of multi-connections. D
efault value is
3500.
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
This command is used to shorten the disconnect time locally when the
remote server has been disconnected.
8.2.29 AT+CIPSGTXT Select GPRS PDP context
AT+CIPSGTXT Select GPRS PDP context
Test Command
AT+CIPSGTXT
=?
Response
+CIPSGTXT: (0,1)
OK
Parameters
See Write Command
Write Command
AT+CIPSGTXT
=<mode>
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<mode> 0 Select first PDP context
1 Select second PDP context
Param
eter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
This command is used to select pdp context, only for multi IP connection
(+CIPMUX=1).
SIMCOM COMFIDENTIAL FILE

SimCom SIM700C Specifications

General

Brand	SimCom
Model	SIM700C
Category	Control Unit
Language	English