SimCom SIM700C

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 181 2018-05-08
Reference Note

When extend FTPPUT mode is activated, input data then execute
"AT+FTPPUT=1"
to transmit, after session is complete, if
successful, it returns "+FTPPUT: 1,0"
, otherwise it returns
"+FTPPUT: 1,<error>", <error> see "AT+FTPGET".
11.2.20 AT+FTPMKD Make Directory on the Remote Machine
AT+FTPMKD Make Directory on the Remote Machine
Test Command
AT+FTPMKD=?
Response
OK
Execution
Command
AT+FTPMKD
Response
If success:
OK
+FTPMKD: 1,0
If failed:
OK
+FTPMKD: 1,<error>
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<error> See "AT+FTPGET"
Parameter Saving
Mode
NO_SAVE
Max Response
Time
75 seconds(In case no response is received from server)
Reference Note
The created folder is specified by the "AT+FTPGETPATH" command.
11.2.21 AT+FTPRMD Remove Directory on the Remote Machine
AT+FTPRMD Remove Directory on the Remote Machine
Test Command
AT+FTPRMD=?
Response
OK
Execution
Command
AT+FTPRMD
Response
If success:
OK
SIMCOM COMFIDENTIAL FILE