Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 19 2018-05-08
If the remote station does not answer
NO ANSWER
If connection successful and non-voice call.
CONNECT<text> TA switches to data mode.
Note: <text> output only if ATX<value>
parameter setting with the
<value> >0
When TA returns to command mode after call release
OK
Parameters
<n> String of dialing digits and optionally V.25ter modifiers dialing
digits: 0-9, * , #, +, A, B, C
Following V.25ter modifiers are ignored:
,(comma), T, P, !, W, @
Emergency call:
<n> Standardized emergency number 112 (no SIM needed)
<mgsm> String of GSM modifiers:
I Actives CLIR (Disables presentation of own number to
called party)
i Deactivates CLIR
(Enable presentation of own number
to called party)
G Activates Closed User Group invocation for this call
only
g Deactivates Closed User Group invocation for this call
only
Mode
NO_SAVE
Time
Timeout set with ATS7 (data call)
Reference
V.25ter
Note
2.2.3 ATE Set Command Echo Mode
ATE Set Command Echo Mode
Execution
Command
ATE<value>
Response
This setting determines whethe
r or not the TA echoes characters received
from TE during Command state.
OK
Parameters
To Next Page
Loading...
Need help?
General
