SimCom SIM700C

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 206 2018-05-08
AT+CGNSINF <Latitude>,<Longitude>,<MSL Altitude>,<Speed Over Ground>,
<Course Over Ground>,<Fix Mode>,<Reserved1>,<HDOP>,
<PDOP>,<VDOP>,<Reserved2>,<GNSS Satellites in View>,
<GNSS Satellites Used>,<GLONASS Satellites Used>,<Reserved3>,
<C/N0 max>,<HPA>,<VPA>
OK
Parameters
<GNSS run status>
0 GNSS off
1 GNSS on
<Fix status>
0 Not fixed position
1 Fixed position
See below table 2-3.
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference
Table 2-1: AT+CGNSINF return Parameters
Index Parameter Unit Range Length
1
GNSS run status
--
0-1
1
2 Fix status -- 0-1 1
3
UTC date & Time
yyyyMMddhh
mmss.sss
yyyy: [1980,2039]
MM : [1,12]
dd: [1,31]
hh: [0,23]
mm: [0,59]
ss.sss:[0.000,60.999]
18
4 Latitude ±dd.dddddd [-90.000000,90.000000] 10
5 Longitude ±ddd.dddddd [-180.000000,180.000000] 11
6 MSL Altitude meters
8
7
Speed Over Ground Km/hour [0,999.99]
6
8 Course Over Ground degrees [0,360.00]
6
9 Fix Mode -- 0,1,2
[1]
1
10 Reserved1
0
11
HDOP -- [0,99.9]
4
12 PDOP --
[0,99.9]
4
SIMCOM COMFIDENTIAL FILE