Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 83 2018-05-08
Read Command
AT+CLTS?
Response
+CLTS: <mode>
Write Command
AT+CLTS=<mo
de>
Response
OK
ERROR
Parameters
<mode>
0 Disable
Unsolicited Result Code
When "get local timestamp" function is enabled, the following URC may
be reported if network sends the message to the MS to provide the MS
with subscriber specific information.
1. Refresh network name by network:
*PSNWID: "<mcc>", "<mnc>", "<full network name>",<full
network name CI>,"<short network name>",<short network name
CI>
2. Refresh time and time zone by network:
This is UTC time, the time queried by AT+CCLK command is local
time.
*PSUTTZ: <year>,<month>,<day>,<hour>,<min>,<sec>,"<time
zone>",<dst>
3. Refresh network time zone by network:
+CTZV: "<time zone>"
4. Refresh Network Daylight Saving Time by network:
DST: <dst>
Parameters
<mcc> String type; mobile country code
<mnc> String type; mobile network code
<full network name> String type; name of the network in full length.
<full network name CI> Integer type; indicates whether to add CI.
0 The MS will not add the initial letters of the Country's
Name to the text string.
1 The MS will add the initial letters of the Country's
Name and a separator (e.g. a space) to the text string.
<short network name> String type; abbreviated name of the network
To Next Page
Loading...
Need help?
General
