KFG KFGS KFGL KFGC
Page 10
EN
Dangerous contact voltages may occur
on the unit if the protective earth
conductor is not connected or is inter-
rupted.
1.4 System pressure hazard
Lubrication systems are pressurized
during operation. Centralized lubrication
systems must therefore be depressurized
before starting assembly, maintenance
-
tions or system repairs.
1.5 Compressed air hazard
The described product is pressurized
during operation. The product must
therefore be depressurized before
starting assembly, maintenance or repair
system repairs.
Depending on the model design, the product
may be able to be operated with compressed air.
1.6 Hydraulic pressure hazard
The described product is pressurized
during operation. The product must
therefore be depressurized before
starting assembly, maintenance or repair
system repairs.
Depending on the model design, the product
may be able to be operated hydraulically.
1.3 Electric shock hazard
Electrical connections for the described product
may only be established by qualified and
trained personnel authorized to do so by the
operator, and in observance of the local condi-
tions for connections and local regulations
(e.g., DIN, VDE). Significant bodily injury and
property damage may result from improperly
connected products.
Danger!
Work on products that have not been
de-energized may result in bodily injury.
Assembly, maintenance and repair work
may only be performed on products
technical personnel. Supply voltage
must be switched off before opening
any of the product's components.
The protective earth conductor (PE)
must always be connected. Always
ensure adequate, standard conductor
diameter and secure contact.
Assembly instructions
To Next Page
Loading...
