4.4.2 Filler coupling
As an alternative or in addition to the conical
head nipple (1
2) for
A corresponding coupling socket (part No.
995-001-500) (3) must be mounted on the
4.4.3 Filling cylinder
When used at very low temperatures, the
1).
This is done by removing the screw plug
M20 x1.5 (2) from the lubricant outlet
(part No. 169-000-174) (3
the caps (4) need to be removed from the
995-000-705
KFG KFGS KFGL KFGC
Filling cylinder
169-000-171
Filler socket
169-000-174
Filling via filler coupling 13 Filling via filling cylinder 14
Page 28
EN
Assembly instructions
To Next Page
Loading...
