14. Operational and pump faults
14.3.1 Faults detected by control unit
14.3.2 Fault types
14.3.3 Read faults
14.3.4 Remedy faults
14.3 Malfunctions on KFGC pump unit
All fault notifications are displayed by the
LED
.
Key to LED display:
Warnings are indicated by a constant
LED
light. At the same time, the fault
Malfunctions
LED
light. At the same time, the fault
LED lights up:
Indicates a fault that does not immediately
influence the lubrication program (e.g.,
break in valve cable). The lubrication
program continues despite the fault
notification.
LED flashes:
LED lights up:Indicates a fault that influenc-
es the lubrication program (e.g., break in
piston detector cable). The lubrication pro-
gram is aborted.
LED display, Fig. 27
For a KFGC pump unit, detailed, separate oper-
ating instructions for the LC-CAN5000 control
unit are supplied together with these assembly
instructions.
Chapter 10 of these operating instructions con-
tains the operational and pump faults for the
KFGC unit.
Document no. 951-130-502-EN
Pump unit with LC-CAN5000 control unit
Refer to the operating instructions to remedy
faults on a KFGC pump unit.
The comprehensive monitoring functions of
the LC-CAN 5000 control unit allow faults in
the operational process to be detected, regis-
tered and displayed.
Page 101
EN
To Next Page
Loading...
